27/64" Pen Maker's Bit

Designed especially for turning projects, these precision ground bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit.

• NT$ 294

25/64" Pen Maker's Bit

Designed especially for turning projects, these precision ground bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit.

• NT$ 189

15/32"Pen Maker's Bit

Designed especially for turning projects, these precision ground bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit.

• NT$ 315

10MM Pen Maker's Bit

Designed especially for turning projects, these precision ground bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit.

• NT$ 189

Wood Rack Shelf

This lumber rack set has all the tracks and brackets you need to efficiently store your lumber supply horizontally with proper support on six shelves 6-3/4” apart.

• NT$ 2,200

Barrel Trimmer for Pen Turning

This complete barrel trimming system is an essential tool for squaring the end of your pen blanks and pen tubes prior to final pen kit assembly.

• NT$ 990

Multipack Abrasive Rolls / 150 Grit

This 150 grit abrasive roll is perfect for spindle, pen, or any turning where small strips of abrasive are needed.

• NT$ 60

Pen Assembly Press

This pen assembly press makes an easy and quick job of assembling your newly turned pens and is the perfect tool for pressing pen crafting components together. Suitable for pressing pens of all sizes with its fully adjustable threaded shaft on one end and a sliding bar on the other end.

• NT$ 1,550

Pen Blank Centering Vise (CO) / 1-1/2"

This vise simplifies the procedure of centering the bit on the pen blank and keeps it firmly in place when drilling the hole. This unique design is self centering and can hold any pen blank, wood or acrylic of up to 1-1/2” square.

• NT$ 1,550

French Curve Drawing Templates

• NT$ 150

Can opener zebra wood

Can opener zebra wood is your next great collections. Not only can be make your own collection but also as a beautiful gift for all your friend!

• NT$ 800

Jointer Knife Setting Jig

This jointer knife setting jig lets you set jointer knives in perfect alignment and allows nicked knives to be shifted to get a perfect cut to an accuracy of ±.001-Inch.

• NT$ 1,050

Washer for magnets: 1", O.D.: 1-1/8", Thickness: 5/32"

The 1-1/8” washers for 1” magnets are countersunk for use with flat head screws and are packaged with six #10 x 5/8” screws.

• NT$ 110

Washer for magnets: 3/4", O.D.: 7/8", Thickness: 5/32"

The 7/8” washers for 3/4” magnets are countersunk for use with flat head screws and are packaged with six #10 x 5/8” screws.

• NT$ 105

Washer for magnets: 1/4", O.D.: 3/8", Thickness: 1/8"

The 3/8” washers for 1/4" magnets are countersunk for use with flat head screws and are packaged with ten #4 x 1/2” screws.

• NT$ 90

CUP for magnets: 1", O.D.: 1-1/8", Thickness: 9/32"

These cups are all countersunk for use with flat head screws and are counter-bored to fit the rare-earth magnets we sell.

• NT$ 145

3PCS Tenon Cutter Set

Use for joinery, chair spindles, toy making - anywhere you need to create a quick, accurate tenon.

• NT$ 1,200

Timbermate Wood Filler 250g - Australia Cypress Teak

For over a decade, Timbermate® has been the leading wood filler in Australia. The reason for its dominance is simple: there is no other product like it; there is no other product better.
Timbermate never shrinks, sinks, cracks, or falls out!

• NT$ 370