These 2"-long Protec-Kote™ deck screws were specifically designed for use with 4/4 and 5/4 decking material, and work great with the Kreg Deck Jig.
This single-piece stepped drill bit was designed exclusively for drilling concealed holes with the Kreg Deck Jig™.
With the Kreg Deck Jig and a few simple tools you already own, you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws.
Works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole
Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw blade. Our Precision Trak and Stop Kit is designed to take the guesswork out of cutting wood to length.
The Perfect Miter attachment to the Kreg® stops references a 45 degree mitered board on two surfaces, greatly increasing the cutting accuracy and repeatability of the miter chop saw.
The “Rock Solid” Kreg® Production stop sets the distance from the end of the board and the saw blade for amazing cutting accuracy and cutting repeatability.
The Kreg line of Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood.
The Kreg Right Angle Clamp helps to align workpieces in 90 degree registration. The clamp is designed with a 3/8" steel pin on one arm that fits down into the pocket hole and anchors the workpiece firmly against the second workpiece to be joined.
The COARSE-THREAD screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.
FINE-THREAD screw is used any time you’re driving the screw into a hardwood (i.e., oak, maple, walnut, cherry, hickory, etc.)
Most of the time pocket holes can be placed on the backside or underside of a project where they are hidden from view.
All of our drivers feature a solid one-piece construction, magnetic tip, and complete Quick Change compatibility for fast and easy bit changes.
Rugged depth collar and allen wrench, works for any 3/8” Kreg drill bit. Designed for controlling the depth of your drill bit when drilling standard Pocket-Holes with any of our Kreg Jigs.