Japanese Chisel Hien Uramaru Oire Nomi 9mm

• NT$ 1,380

Japanese Chisel Hien Oire Nomi 30mm

• NT$ 1,500

Chisel Hoop Setting and Removing Tool

• NT$ 1,600

KAKURI "Mukomachi" Chisel 9mm

It is ideal for large deep mortise and cutting out end grain. The cutting angle is set at 30 Degrees which is perfect for driving through end grain in both soft and hardwoods.

• NT$ 2,400

KAKURI "Mukomachi" Chisel 6mm

It is ideal for large deep mortise and cutting out end grain. The cutting angle is set at 30 Degrees which is perfect for driving through end grain in both soft and hardwoods.

• NT$ 2,100

KAKURI "Mukomachi" Chisel 3mm

It is ideal for large deep mortise and cutting out end grain. The cutting angle is set at 30 Degrees which is perfect for driving through end grain in both soft and hardwoods.

• NT$ 2,100

KAKURI Bachi Nomi Tapered Chisel 21mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 2,085

KAKURI Bachi Nomi Tapered Chisel 18mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 2,015

KAKURI Bachi Nomi Tapered Chisel 15mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 1,960

KAKURI Bachi Nomi Tapered Chisel 12mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 1,930

KAKURI Bachi Nomi Tapered Chisel 9mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 1,900

KAKURI Bachi Nomi Tapered Chisel 6mm

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners. The handles are made of Japanese red oak and have forged steel hoops.

• NT$ 1,870

KAKURI Hira Nomi Shinogi type Long and Thin Blade 24mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 2,160

KAKURI Hira Nomi Shinogi type Long and Thin Blade 18mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 1,965

KAKURI Hira Nomi Shinogi type Long and Thin Blade 12mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 1,750

KAKURI Hira Nomi Shinogi type Long and Thin Blade 9mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 1,660

KAKURI Hira Nomi Shinogi type Long and Thin Blade 6mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 1,625

KAKURI Hira Nomi Shinogi type Long and Thin Blade 3mm

For light-duty use, e.g. finishing of finger joints and dovetails. Thin blades, triangular cross-section, finely ground right to the edge. Handles made of Japanese red oak.

• NT$ 1,625